Error!

Error: The VisitorStats module encountered a DB error.


Publications

PUBLICATIONS

 

1983

d'Agostino L. and Brennen C.E., 1983, “On the Acoustical Dynamics of Bubble Clouds”, ASME FED-Vol. 2, pp. 72-75, Cavitation and Multiphase Flow Forum, Applied Mechanics, Bioengineering and Fluids Engineering Conf., Houston, Texas, USA, June 20–22, pp. 72-75.

d'Agostino L. and Acosta A.J., 1983, “On the Design of Cavitation Susceptibility Meters”, Proc. 20th American Towing Tank Conf., Vol. 1, pp. 307–350, Hoboken, New Jersey, USA, August 2–4.

1984

d'Agostino L., Brennen C.E. and Acosta A.J., 1984, “On the Linearized Dynamics of Two-Dimensional Bubbly Flows over Wave-Shaped Surfaces”, ASME FED-Vol. 9, pp. 8-13, Cavitation and Multiphase Flow Forum, 9th rence, New Orleans, Louisiana, USA, February 12–16.

1987

d'Agostino L. and Acosta A.J., 1987, “A Cavitation Susceptibility Meter with Optical Cavitation Monitoring”, Int. Towing Tank Conf., Kobe, Japan, pp. 1-19.

1988

d'Agostino L., Brennen C.E. and Acosta A.J., 1988, “Linearized Dynamics of Two-Dimensional Bubbly and Cavitating Flows over Slender Surfaces”, J. of Fluid Mechanics, Vol. 192, pp. 485-509.

O'Hern T.J., d'Agostino L. and Acosta A.J., 1988, “Comparison of Holographic and Coulter Counter Measurements of Cavitation Nuclei in the Ocean”, ASME J. of Fluids Engineering, Vol. 110, pp. 200-207.

d'Agostino L. and Brennen C.E., 1988, “Acoustical Absorption and Scattering Cross-Sections of Spherical Bubble Clouds”, ASME FED-Vol. 64, pp. 50-53b, Cavitation and Multiphase Flow Forum, Proc. Joint AIAA/ASME/ASCE/SIAM/APS National Fluid Dynamics Congress, Cincinnati, Ohio, USA, July 24–28.

d'Agostino L., Thai Pham and Green S., 1988, “Comparison of a Cavitation Susceptibility Meter and Holographic Observation for Nuclei Detection in Liquids”, ASME FED-Vol. 64, pp. 20-24, Cavitation and Multiphase Flow Forum, Proc. Joint AIAA/ASME/ASCE/SIAM/APS National Fluid Dynamics Congress, Cincinnati, Ohio, USA, July 24–28.

d'Agostino L. and Brennen C.E., 1988, “Acoustical Absorption and Scattering Cross-Sections of Spherical Bubble Clouds”, J. of Acoustical Society of America, No. 84 (6), pp. 2126-2134.

O'Hern T.J., d'Agostino L. and Acosta A.J., 1988, “Comparison of Holographic and Coulter Counter Measurements of Cavitation Nuclei in the Ocean”, Proc. Joint AIAA/ASME/ASCE/SIAM/APS First National Fluid Dynamics Congress, July 24-28, Cincinnati, Ohio, USA.

d'Agostino L., 1988, “Cavitation and Fluid Dynamics of Cryogenic Turbopumps for Liquid Rocket Fuel Feed System”, A.D.I.A. 88-8, Dipartimento di Ingegneria Aerospaziale., Università di Pisa, Editrice Tecnico Scientifica, Pisa, Italy.

1989

d'Agostino L., Thai Pham and Green S., 1989, “Comparison of a Cavitation Susceptibility Meter and Holographic Observation for Nuclei Detection in Liquids”, ASME J. of Fluids Engineering, Vol. 111, No. 2, pp. 197-203.

d'Agostino L., and Brennen C.E., 1989, “Linearized Dynamics of Spherical Bubble Clouds”, J. of Fluid Mechanics, Vol. 199, pp. 155-176.

d'Agostino L. and Green S.I., 1989, “Simultaneous Cavitation Susceptibility Meter and Holographic Measurement of Nuclei in Liquids”, ASME FED-Vol. 79, pp. 37-42, ISBN No. 0-7918-0342-2, ASME Cavitation and Multiphase Flow Forum, 3rd Joint ASCE/ASME Mechanics Conf., San Diego, California, USA, July 9–12.

1990

d'Agostino L. and Acosta A.J., 1990, “Separation and Surface Nuclei Effects in a Cavitation Susceptibility Meter”, ASME FED-Vol. 99, pp. 179-186, ISBN No. 0-7918-0546-8, Advances in Gas–Liquid Flows, ASME Winter Annual Meeting, Dallas, Texas, USA, November 25–30.

1991

d'Agostino, L. and Acosta, A.J., 1991, “A Cavitation Susceptibility Meter with Optical Cavitation Monitoring - Part One: Design Concepts”, ASME J. of Fluids Engineering, Vol. 113, No. 2, pp. 261-269.

d'Agostino, L. and Acosta, A.J., 1991, “A Cavitation Susceptibility Meter with Optical Cavitation Monitoring - Part Two: Experimental Apparatus and Results”, ASME J. of Fluids Engineering, Vol. 113, No. 2, pp. 270-277.

d'Agostino, L., and Acosta, A.J., 1991, “Separation and Surface Nuclei Effects in a Cavitation Susceptibility Meter”, ASME J. of Fluids Engineering, Vol. 113, No. 4, pp. 695-699.

1992

d'Agostino, L., and Green, S.I., 1992, “Simultaneous Cavitation Susceptibility Meter and Holographic Measurement of Nuclei in Liquids”, ASME J. of Fluids Engineering, Vol. 114, No. 2, pp. 261-267.

1993

Ciucci A., d'Auria F. and d'Agostino L., 1993, “Linear Analysis of Vortex-Shedding Induced Longitudinal Oscillations in Segmented Solid Rocket Motors”, Atti del 12° Congresso Nazionale AIDAA, Vol. 1, pp. 751-762, Como, Italy, July 20-23.

Genuini G., d'Agostino L. and Andrenucci M., 1993, “Simulazioni d’Impatto in Manovre di Rendez-Vous”, Atti del 12° Congresso Nazionale AIDAA, Vol. 2, pp. 1381-1392, Como Italy, July 20-23.

Scortecci F., d'Agostino L., d'Auria F. and Andrenucci M., 1993, “Arcjet Propulsion System Study for NSSK”, IEPC Paper 93-013, Proc. 23rd Int. Electric Propulsion Conf., pp. 162-173, Seattle, Washington, USA, September 13-17.

Ciucci A., d'Agostino L. and Andrenucci M., 1993, “Development of a Numerical Model of the Nozzle Flow in Low Power Arcjet Thrusters”, IEPC Paper 93-182, Proc. 23rd Int. Electric Propulsion Conf., pp. 1662-1674, Seattle, Washington, USA, September 13-17.

1994

d'Auria F., d'Agostino L. and Brennen C.E., 1994, “Linearized Dynamics of Bubbly and Cavitating Flows in Cylindrical Ducts”, ASME FED-Vol. 194, pp. 59-66, ISBN No. 0-7918-1377-6, Cavitation and Multiphase-Flow Forum, 1994 ASME Fluids Engineering Division Summer Meeting, Incline Village, Nevada, USA, June 19-23.

Capecchi G. and d’Agostino L., 1994, “Numerical Model of Equilibrium Composition and Transport Coefficients of Hydrazine under Dissociation and Ionization”, AIAA Paper 94-2868, 30th AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Indianapolis, Indiana, USA, June 27-29.

1995

d’Agostino L., d’Auria F. and Brennen C.E., 1995, “Stability of Parallel Bubbly and Cavitating Flows”, Proc. Int. Symp. on Cavitation, pp. 385–390, Deauville, France, May 2-5.

d’Auria F., d’Agostino L. and Brennen C.E., 1995, “Inviscid Stability of Bubbly Jets”, 31st AIAA/ASME/SAE/ASEE Joint Propulsion Conf., San Diego, California, USA, July 10-12.

d’Auria F., d’Agostino L. and Brennen C.E., 1995, “Bubble Dynamic Effects on the Rotordynamic Forces in Cavitating Inducers”, ASME FED-Vol. 210, pp. 47-54, ISBN No. 0-7918-1465-3, Cavitation and Multiphase Flow, 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conf., Hilton Head, South Carolina, USA, August 13-18.

1996

d’Auria F., d’Agostino L. and Brennen C.E., 1996, “Dynamic Response of Ducted Bubbly Flows to Turbomachinery-Induced Perturbations”, ASME J. of Fluids Engineering, Vol. 118, pp. 595–601.

d’Auria F., d’Agostino L. and Brennen C.E., 1996, “The Effects of Vapor/Gas Bubbles on the Rotodynamic Forces in Bearings”, ASME FED-Vol. 236, Vol. 1, pp. 337-343, ISBN No. 0-7918-1791-1, Fluids Engineering Division Conf., San Diego, California, USA, July 7-11.

1997

d’Agostino L., d’Auria F. and Brennen C.E., 1997, “On the Inviscid Stability of Parallel Bubbly Flows”, J. of Fluid Mechanics, Vol. 339, pp. 261-274.

d’Auria F. and d’Agostino L., 1997, “Linear Stability of Parallel Two-Dimensional Shear Layers Containing Vapor-Gas Bubbles”, ASME Paper FEDSM97-3525, 1997 ASME Fluids Engineering Division Summer Meeting, Vancouver, British Columbia, Canada, June 22-26.

d’Agostino L. and d’Auria F., 1997, “Three-Dimensional Analysis of Rotordynamic Forces on Whirling and Cavitating Inducers”, ASME Paper FEDSM97-3335, 1997 ASME Fluids Engineering Division Summer Meeting, Vancouver, British Columbia, Canada, June 22-26.

Paolucci F., d’Agostino L. and Burgoni S., 1997, “Design and Performance Study of a Micro-Newton Thrust Stand for FEEP”, ESA SP-398, pp. 465–472, Proc. 2nd European Spacecraft Propulsion Conf., ESTEC, Noordwijk, The Netherlands, May 27-29.

Scortecci F., Paganucci F. and d'Agostino L., 1997, “A New Hypersonic High Enthalpy Wind Tunnel”, Paper AIAA-97-3017, 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Seattle, Washington, USA, July 6-9.

Consumi M. and d’Agostino L., 1997, “Monitoring and Fault Diagnosis of a Turbojet by Bayesian Inference”, ISABE Paper 97-7146, Vol. 2, pp. 1082–1096, 13th Int. Symp. on Air Breathing Engines, Chattanooga, TN, USA, September 7-12.

1998

Burzagli F. and d’Agostino L., 1998, “Linear Stability of Blasius Boundary Layers Containing Gas-Vapor Bubbles”, Proc. 3rd Int. Symp. on Cavitation, Vol. 1, pp. 99–105, Grenoble, France, April 7-10.

Biagioni L., Scortecci F., Paganucci F., d'Agostino L. and Andrenucci M., 1998, “Performance of Centrospazio Hypersonic High Enthalpy Wind Tunnel”, AIAA Paper 98-1508, pp. 42–48, ISBN No. 1-56347-266-X, AIAA 8th Int. Space Planes and Hypersonic Systems and Technologies Conf., Norfolk, Virginia, USA, April 27-30.

Scortecci F., Paganucci F. and d'Agostino L., 1998, “Experimental Investigation of Shock Wave/Boundary Layer Interactions over an Artificially Heated Model in Hypersonic Flow”, AIAA Paper 98-1571, pp. 330–339, ISBN No. 1-56347-266-X, AIAA 8th Int. Space Planes and Hypersonic Systems and Technologies Conf., Norfolk, VA, USA, April 27-30.

d’Agostino L., d’Auria F. and Brennen C.E., 1998, “A Three-Dimensional Analysis of Rotordynamic Forces on Whirling and Cavitating Helical Inducers”, ASME J. of Fluids Engineering, Vol. 120, pp. 698-704.

Consumi M. and d’Agostino L., 1998, “A Statistical Inference Approach to Gas Path Analysis of a Turbofan”, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, AIAA Paper 98-3551, Cleveland, OH, USA, July 13-15.

d’Agostino L., 1998, “On the Stability of Parallel Bubbly Cavitating Flows”, 1998 US-Japan Seminar on Abnormal Flow Phenomena in Turbomachines, Osaka, Japan, November 1-6.

Biagioni L., Scortecci F., Paganucci F., Banetta S. and d’Agostino L., 1998, “Two Years of Arc Tunnel Experience at Centrospazio”, ESA SP-426, pp. 649–657, Proc. 3rd Symp. on Aerothermodynamics for Space Vehicles, Noordwjik, The Netherlands, November 24-26.

1999

Biagioni L. and d’Agostino L., 1999, “A Pressure-Based Method for Turbulence Measurement in Hypersonic Flows”, 18th ICIASF Int. Congress on Instrumentation in Aerospace Simulation Facilities, Toulouse, France, June 14-17.

Biagioni L. and d’Agostino L., 1999, “Measurements of Energy Spectra in Weakly Compressible Turbulence”, 17th AIAA Applied Aerodynamics Conf., AIAA Paper 99-3516, Norfolk, VA, USA, June 28-July 1.

d’Agostino L., 1999, “The Effects of Gas Bubbles on the Rotordynamic Forces in Finite-Length Bearings”, ASME Paper FEDSM99-7208, 3rd ASME/JSME Joint Fluids Engineering Conf., San Francisco, California, USA, July 18-23, 1999.

2000

d’Agostino L. and Burzagli F., 2000, “On the Stability of Parallel Bubbly Cavitating Flows”, ASME J. Fluids Engineering, Vol. 122, pp. 471-480.

Pascarella C., Ciucci A., Salvatore V. and d’Agostino L., 2000, “A Numerical Tool for the Investigation of Cavitating Flows in Turbopump Inducers”, 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, AIAA Paper 2000-3681, Huntsville, AL, USA, July 17-19.

Boccaletto L. and d’Agostino L., 2000, “Design and Testing of a Micro-Newton Thrust Stand for FEEP”, 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, AIAA Paper 2000-3268, Huntsville, AL, USA, July 17-19.

2001

Rapposelli E. and d’Agostino L., 2001, “A Modified Isenthalpic Model of Cavitation in Plane Journal Bearings”, CAV2001, Int. Symp. on Cavitation, Pasadena, California USA, June 20-23.

Salvatore V., Pascarella C. and d’Agostino L., 2001, “Numerical Evaluation of Cavitating Flows Using Different Two-Phase Models”, ICMF2001 Paper 713, New Orleans, Luoisiana USA, June.

d’Agostino L., Rapposelli E., Pascarella C. and Ciucci A., 2001, “A Modified Bubbly Isenthalpic Model for Numerical Simulation of Cavitating Flows”, AIAA Paper 2001-3402, 37th AIAA/ASME/SAE/ASEEJoint Propulsion Conf., Salt Lake City, Utah, USA, July 8-11.

d'Agostino L., Biagioni L. and Lamberti G., 2001, “An Ignition Transient Model for Solid Propellant Rocket Motors”, AIAA Paper 2001-3449, 37th AIAA/ASME/SAE/ASEEJoint Propulsion Conf., Salt Lake City, Utah, USA, July 8-11.

d'Agostino L., Biagioni L. and Cinotti R., 2001, “Turboshaft Engine Condition Monitoring by Bayesian Identification”, 15th Int. Symp. on AirBreathing Engines (ISOABE), Bangalore, India, September 2001.

Passaro A., Biagioni L., d’Agostino L., 2001, “Compressibility Effects in Weakly Turbulent Hypersonic Flow Fields”, 4th European Symp. on Aerothermodynamics for Space Vehicles, Capua (CE), Italy, October 15-18.

2002

d’Agostino L., and Venturini-Autieri M., 2002, “Three-Dimensional Analysis of Rotordynamic Fluid Forces on Whirling and Cavitating Finite-Length Inducers”, 9th Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-9), Honolulu, Hawaii, USA, February 10-14.

Rapposelli E., Falorni R. and d’Agostino L., 2002, “Two-Phase and Inertial Effects on the Rotordynamic Forces in Whirling Journal Bearings”, ASME Paper FEDSM2002-31007, Proc. 2002 ASME Fluid Engineering Division Summer Meeting, Montreal, Quebec, Canada, July 14-18.

Rapposelli E., Cervone A. and d’Agostino L., 2002 “A New Cavitating Pump Rotordynamic Test Facility”, AIAA Paper 2002-4285, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Indianapolis, IN, USA, July 8-11.

Rapposelli E., Cervone A., Bramanti C. and d’Agostino L., 2002 “A New Cavitation Test Facility at Centrospazio”, 4th Int. Conf. on Launcher Technology “Space Launcher Liquid Propulsion”, Liège, Belgium, Dec. 3-6, 2002.

2003

Ciucci A., d’Auria F. and d’Agostino L., 2003, “Linear Analysis of Vortex-Shedding Induced Longitudinal Oscillations in Segmented Solid Rocket Motors”, AIAA Paper 2003-4672, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Hunstville, Alabama, USA, July 20-23.

Rapposelli E., Cervone A., Bramanti C., d’Agostino L., 2003, “Thermal Cavitation Experiments on a NACA 0015 Hydrofoil”, ASME Paper FEDSM2003-45006, 4th ASME/JSME Joint Fluids Engineering Conf., Honolulu, HI, USA, July 6-11.

Rapposelli E. and d’Agostino L., 2003, “Cavitation and Rotordynamic Activities at Centrospazio”, AIAA Paper 2003-4769, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Hunstville, Alabama, USA, July 20-23.

Bramanti C., Cervone A., Rapposelli E. and d’Agostino L., 2003, “Experimental Activities on Liquid Propellant Turbopumps at Centrospazio”, 7° Congresso Nazionale AIDAA, Roma, Italy, September 15-19.

Rapposelli E. and d’Agostino L., 2003, “Modeling Activities on Cavitating Flows at Centrospazio”, 7° Congresso Nazionale AIDAA, Roma, Italy, September 15-19.

Biagioni L., Cinotti R. and d'Agostino L., 2003, “Application of Bayesian Techniques to Turbine Condition Monitoring”, 9th CEAS European Propulsion Forum, October 15-17, Roma, Italy.

Sinibaldi E., Beux F., Salvetti M.V., d'Agostino L., 2003, “Numerical Experiments with an Homogeneous-Flow Model for Thermal Cavitation”, CAV 2003, 5th Int. Symp. on Cavitation, November 1-4, Osaka, Japan.

Rapposelli E. and d'Agostino L., 2003, “A Barotropic Cavitation Model with Thermal Effects”, CAV 2003, 5th Int. Symp. on Cavitation, November 1-4, Osaka, Japan.

d'Agostino L. and Venturini-Autieri M.R., 2003, “Rotordynamic Fluid Forces on Whirling and Cavitating Radial Impellers”, CAV 2003, 5th Int. Symp. on Cavitation, November 1-4, Osaka, Japan.

2004

Baker A.M., Rapposelli E., Cervone A., d'Agostino L. and Caramelli F., 2004, “Chemical Propulsion Systems for Mars Sample Return”, ESA Space Propulsion 2004, June 2-9, Chia Laguna, (Cagliari), Italy.

Rapposelli E., Cervone A., Testa R. and d'Agostino L., 2004, “Thermal Effects on Cavitation Instabilities in Helical Inducers”, AIAA Paper 2004-4021, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Fort Lauderdale, FL, USA, July 11-14.

Cervone A., Rapposelli E., Bramanti C. and d'Agostino L., 2004, “Thermodynamic Effects on Hydrofoil and Inducer Cavitation”, 3rd Int. Symp. on Two-Phase Flow Modelling and Experimentation, Pisa, Italy, September 22-24.

2005

Cervone A., Testa R., Bramanti C., Rapposelli E., and d'Agostino L., 2005, "Thermal Effects on Cavitation Instabilities in Helical Inducers", AIAA J. of Propulsion and Power, Vol. 21, No. 5, pp. 893-899.

Cervone A., Rapposelli E. and d’Agostino L., 2005, “A Simplified Model for the Evaluation of the of Ascent Trajectories”, AIAA Paper 2005-4507, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Tucson, AZ, USA, July 11-14.

Cervone A., Torre L., Bramanti C., Rapposelli E. and d’Agostino L., 2005, “Experimental Characterization of Cavitation Instabilities in the Avio “FAST2” Inducer”, AIAA Paper 2005-4451, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Tucson, AZ, USA, July 11-14.

Bramanti C., Cervone A. and d’Agostino L., 2005, “Assessment of the Propulsive Performance of Fuel Vapor Pressurized Hydrogen Peroxide-Ethane Rocket Engines”, 18° Congresso Nazionale AIDAA, Volterra, Italy, September 19-22.

Cervone A. , Bramanti C., Rapposelli E. and d’Agostino L., 2005, “Cavitation Experiments on Turbopump Inducers and Hydrofoils at Alta/Centrospazio: Overview and Future Activities”, FEDSM 2005 – ASME Fluids Engineeing Division Summer Meeting, Houston, TX, USA, June 2005.

2006

Cervone A., Bramanti C., and d'Agostino L., 2006, “Thermal Cavitation Experiments on a NACA 0015 Hydrofoil”, ASME J. of Fluids Engineering, Vol. 128, No. 2, March 6, 2006, pp. 326-331.

Bramanti C., Cervone A., Romeo L., Torre L., d’Agostino L., Musker A. and Saccoccia G., 2006, “Experimental Characterization of Advanced Materials for the Catalytic Decomposition of Hydrogen Peroxide”, AIAA Paper 2006-5238, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Sacramento, California, USA, July 9 - 12.

Cervone A., Torre L., d’Agostino L., Musker A., Graham T.R., Bramanti C. and Saccoccia G., 2006, “Development of Hydrogen Peroxide Monopropellant Rocktes”, AIAA Paper 2006-5239, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Sacramento, California, USA, July 9 - 12.

Cervone A., Torre L., Fotino D., d’Agostino L., and Bramanti C., 2006, “Characterization of Cavitation Instabilities in Axial Inducers by Means of High-Speed Movies”, AIAA Paper 2006-5067, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Sacramento, California, USA, July 9 - 12.

Cervone A., Torre L., Fotino D., Bramanti C. and d’Agostino L., 2006, “Setup of a High-Speed Optical System for the Characterization of Cavitation Instabilities in Space Rocket Turbopumps”, 6th Int. Symp. on Cavitation, CAV2006, Wageningen, The Netherlands, September 11-15.

Cervone A., Torre L., Bramanti C., Rapposelli E, and d'Agostino L., 2006, “Experimental Characterization of Cavitation Instabilities in a Two-Bladed Axial Inducer”, AIAA J. of Propulsion and Power, Vol. 22, No. 6, Nov-Dec 2006, pp. 1389-1395.

Cervone A., Romeo L., Torre L., d’Agostino L., Calderazzo F., Musker A., Graham T.R., and Saccoccia G., 2006, “Development of Green Hydrogen Peroxide Monopropellant Rocket Engines and Testing of Advanced Catalytic Beds”, 3rd Int. Conf. on Green Propellants for Space Propulsion and 9th Int. Hydrogen Peroxide Propulsion Conf., September, 17, Poitiers, France.

2007

Pasini A., Torre L., Romeo, d'Agostino L., Cervone A. and Musker A., 2007, “Experimental Characterization of a 5 N Hydrogen Peroxide Monopropellant Thruster Prototype”, AIAA Paper 2007-5465, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Cincinnati, OH, USA, July 8-11.

Bramanti C., Cervone A. and d'Agostino L., 2007, “A Simplified Analytical Model for Evaluating the Noncavitating Performance of Axial Inducers”, AIAA Paper 2007-5514, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Cincinnati, OH, USA, July 8-11.

d'Agostino L. and Andrenucci M., 2007, “Unsteady Ballistic Code for Performance Prediction of Solid Propellant Rocket Engines”, AIAA Paper 2007-5779, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Cincinnati, OH, USA, July 8-11.

Romeo L., Torre L., Pasini A., d'Agostino L., Calderazzo F. and Cervone A., 2007, “Performance of Different Catalysts Supported on Alumina Spheres for Hydrogen Peroxide Decomposition”, AIAA Paper 2007-5466, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Cincinnati, OH, USA, July 8-11.

“Fluid Dynamics of Cavitation and Cavitating Turbopumps”, CISM Courses and Lectures No. 496, Int. Centre for Mechanical Sciences, d’Agostino L. and Salvetti M.V. Editors, Springer, Vien and New York, 2007.

Cervone A., Bramanti C., Torre L., Fotino D. and d’Agostino L., 2007, “Setup of a High-Speed Optical System for the Characterization of Instabilities Generated by Cavitation”, ASME J. Fluids Engineering, Vol. 129, pp. 877-885.

d’Agostino L., 2007, “The Different Role of Cavitation on Rotordynamic Whirl Forces in Axial Inducers and Centrifugal Impellers”, CISM Courses and Lectures No. 496, Int. Centre for Mechanical Sciences, d’Agostino L. and Salvetti M.V. Editors, Springer, Vien and New York, 2007, pp. 253-78.

2008

d’Agostino L., Torre L., Pasini A. and Cervone A., 2008, “A Reduced Order Model for Preliminary Design and Performance Prediction of Tapered Inducers”, 12th Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 17-22.

Romeo L., Torre L., Pasini A., d’Agostino L. and Calderazzo F., 2008, “Development and Testing of Pt/Al2O3 Catalysts for Hydrogen Peroxide Decomposition”, Space Propulsion 2008, 5th Int. Space Propulsion Conf., 2nd Int. Symp. on Space Transportation, Heraklion, Crete, Greece, May 5-8.

Pasini A., Torre L., Romeo L., Cervone A. and d'Agostino L., 2008, “Testing and Characterization of a Hydrogen Peroxide Monopropellant Thruster”, AIAA J. of Propulsion and Power, Vol. 24, No. 3 (May–June), pp. 507-15.

d’Agostino L., Torre L., Pasini A., Baccarella D., Cervone A. and Milani A., 2008, “A Reduced Order Model for Preliminary Design and Performance Prediction of Tapered Inducers: Comparison with Numerical Simulations”, AIAA Paper 5119, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Hartford, CT, USA, July 21–23.

Pasini A, Torre L., L. Romeo L. and d’Agostino L., 2008, “Performance Modeling and Analysis of H2O2 Catalytic Pellet Reactors”, AIAA Paper 5025, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Hartford, CT, USA, July 21–23.

Romeo L., Torre L., Pasini A., d’Agostino L., and Calderazzo F., 2008, “Comparative Characterization of Advanced Catalytic Beds for Hydrogen Peroxide Thrusters”, AIAA Paper 5027, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Hartford, CT, USA, July 21–23.

Torre L., Pasini A., Romeo L. and d’Agostino L., 2008, “Firing Performance of Advanced Hydrogen Peroxide Catalytic Beds in a Monopropellant Thruster Prototype”, AIAA Paper 4937, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. and Exhibit, Hartford, CT, USA, July 21–23.

Cervone A., Torre L., Pasini A. and d’Agostino L., 2008, ‘Cavitation and Turbopump Hydrodynamics Research at Alta S.P.A. and Pisa University”, 4th Int. Symp. on Fluid Machinery and Fluid Engineering, Nov. 24-27, 2008, Beijing, China.

d’Agostino L., Torre L., Pasini A., Cervone A., 2008, “On the Preliminary Design and Noncavitating Performance of Tapered Axial Inducers”, ASME J. of Fluids Engineering, Vol. 130, Is. 11, November 2008, pp. 111303-1/111303-8.

2009

Romeo L., d’Agostino L. and Calderazzo F., 2009, “Testing of Innovative Catalyst Beds for Hydrogen Peroxide Monopropellant Thruster”, XX Congresso AIDAA, Milano, Italy, June 29–July 3.

Cervone A., Torre L., Pasini A., Baccarella D., and d’Agostino L., 2009, “Cavitation and Flow Instabilities in a 3- Bladed Axial Inducer Designed by Means of a Reduced Order Analytical Model”, Proc. 7th International Symposium on Cavitation, CAV2009 – Paper No. #92, August 17-22, 2009, Ann Arbor, Michigan, USA.

Torre L., Pasini A., Cervone A. and d’Agostino L., 2009, “Experimental Performance of a Tapered Axial Inducer: Comparison with Analytical Predictions”, AIAA Paper 2009-4955, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. & Exhibit, Denver, Colorado, USA, Aug. 2 - 5.

Romeo L., Genovese C., Torre L., Pasini A., Cervone A., d’Agostino L., Centi G. and S. Perathoner S., 2009, “Use of Pt/CexZr1-xAl2O3 as Advanced Catalyst for Hydrogen Peroxide Thrusters”, AIAA Paper 2009-5231, 45th AIAA-ASME-SAE-ASEE Joint Propulsion Conf. & Exhibit, Denver, Colorado, USA, Aug. 2 - 5.

Pasini A., Torre L., Romeo L., Cervone A. and d’Agostino L., 2009, “Endurance Tests on Different Catalytic Beds for H2O2 Monopropellant Thrusters”, AIAA Paper 2009-5472, 45th AIAA-ASME-SAE-ASEE Joint Propulsion Conf. & Exhibit, Denver, Colorado, USA, Aug. 2 - 5.

Torre L., Pasini A., Romeo L., Cervone A. and d'Agostino L., 2009, "Performance of a Monopropellant Thruster Prototype Using Advanced Hydrogen Peroxide Catalytic Beds”, AIAA J. of Propulsion and Power, Vol. 25, No. 6, pp. 1291-99.

2010

Torre L., Pace G., Miloro P., Pasini A., Cervone A. and d’Agostino L., 2010, “Flow Instabilities on a Three-Bladed Axial Inducer at Variable Tip Clearance”, 13th Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, April 4-9.

Torre L., Pasini A., Cervone A., Pecorari L., Milani A. and d’Agostino L., 2010, “Rotordynamic Forces on a Three Bladed Inducer”, Space Propulsion 2010, May 3-6, San Sebastian, Spain.

Romeo L., Bonavita A., Torre L., Pasini A., Cervone A., d’Agostino L., Centi G. and Perathoner S., 2010, “Post-Reaction Characterization of a Pt/CexZrx-1/Al2O3 Catalyst after the Use in a HTP Thruster”, Space Propulsion 2010, May 3-6, San Sebastian, Spain.

Pasini A., Torre L., Romeo L., Cervone A., Masi L. and d’Agostino L., 2010, “High Mass Flux Tests on Catalytic Beds for H2O2 Monopropellant Thruster”, Space Propulsion 2010, May 3-6, San Sebastian, Spain.

Torre L., Romeo L., Pasini A., Cervone A. and d’Agostino L., 2010, “Green Propellants Research at Alta S.p.A.”, Space Propulsion 2010, May 3-6, San Sebastian, Spain.

Pasini A., Torre L., Romeo L., Cervone A., d’Agostino L., “A Reduced Order Model for H2O2 Catalytic Reactor Performance Analysis”, AIAA Journal of Propulsion and Power, Vol. 26, No. 3, May-Jun 2010, pp. 446-453.

Pasini A., Torre L., Romeo L., Cervone A., d’Agostino L., 2010, “Thermal Stress Analysis of Ceramic Pellets for Catalysis”, 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, USA, July 25 - 28.

Pasini A., Torre L., Cervone A., d’Agostino L., 2010, “Rotordynamic Forces on a Four Bladed Inducer”, 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, USA, July 25 - 28.

Cervone A., Torre L., Pasini A., Piccoli E.A., d’Agostino L., 2010, “Design of a Test Setup for the Characterization of the Dynamic Transfer Matrix of Cavitating Inducers”, 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, USA, July 25 - 28